Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 and 2 if there are two memory modules.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
5. Follow the procedure in
After working inside your computer
.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
22
Removing and installing components
