Steps
1. Align the screw holes on the speakers with the screw holes on the display-assembly base and route the cable through the routing
guides on display-assembly base.
2. Replace the eight screws (M3 4+7.1xZN) that secure the speakers to the display-assembly base.
3. Route the speaker cable through the routing guide on display-assembly base and connect the speaker cable to the system board.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
5. Follow the procedure in
After working inside your computer
.
Microphones
Removing the microphones
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
6. Remove the
About this task
The following image indicates the location of the microphones and provides a visual representation of the removal procedure.
Removing and installing components
35
