5. Install the
6. Install the
7. Install the
8. Install the
9. Follow the procedure in
After working inside your computer
.
NOTE:
Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE:
Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program.
You must make the appropriate changes again after you replace the system board.
Base panel
Removing the base panel
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
6. Remove the
7. Remove the
.
8. Remove the
.
9. Remove the
10. Remove the
.
11. Remove the
12. Remove the
.
13. Remove the
14. Remove the
.
15. Remove the
16. Remove the
17. Remove the
18. Remove the
.
19. Remove the
.
About this task
The following image indicates the location of the base panel and provides a visual representation of the removal procedure.
50
Removing and installing components
