Steps
1. Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the M.2 2280 solid-state drive into the M.2 card slot on the system board.
3. Place the the M.2 thermal shield on the M.2 2280 solid-state drive.
4. Align the screw holes on the M.2 thermal shield with the screw holes on the palm-rest and keyboard assembly.
5. Replace the screw (M2x2.2) that secures the M.2 thermal shield to the palm-rest and keyboard assembly.
6. Tighten the captive screw that secures the M.2 thermal shield to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
After working inside your computer
.
Memory modules
Removing the memory modules
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
NOTE:
Depending on the configuration ordered your computer may come shipped with one or two memory modules
installed.
The following images indicate the location of the memory modules and provides a visual representation of the removal
procedure.
Removing and installing components
21