2. Slide the solid-state drive into the solid-state drive slot on the system board.
3. Replace the (M2x3) screw to secure the solid-state drive to the system board.
Next steps
1. Install the
.
2. Exit the
3. Install the
for 4G LTE enabled systems.
4. Install the
.
after working inside your computer
.
M.2 solid-state drive conversion bracket
Replacing the M.2 solid-state drive conversion bracket
Prerequisites
before working inside your computer
.
2. Remove the
3. Remove the
4. Enter the
.
5. Remove the
.
6. Remove the
.
About this task
The following image indicates the location of the M.2 solid-state drive conversion bracket and how it can be used to fit
solid-state drives of different length.
NOTE:
The following image is from systems shipped with discrete graphic card. The system board has a different
configuration for systems shipped with integrated graphic card.
28
Removing and installing components
