Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
SIM tray
Removing the SIM tray (WWAN models)
1
Follow the procedure
Before working inside your computer
2
Insert the tip of a paperclip into the hole of the SIM tray slot and then pull out and remove the SIM tray [1].
Installing the SIM tray (WWAN models)
1
Align and push the SIM tray back into the SIM tray slot.
2
Follow the procedure in
After working inside your computer
3
10
Removing and installing components