3. Replace the
.
4. Replace the
5. Replace the
.
6. Replace the
(applicable only to computers shipped with optical drive).
Display cable
Removing the display cable
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Prerequisites
1. Remove the
(applicable only to computers shipped with optical drive).
2. Remove the
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
Procedure
NOTE:
This procedure is applicable only for computers shipped with non-touchscreen displays.
1. Disconnect the camera cable from the camera module.
2. Note the display cable routing and remove the cable from the routing guides on the display back-cover and antenna assembly.
3. Remove the display cable from the display back-cover and antenna assembly.
Replacing the display cable
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
Removing and installing components
71