Removing the power-supply unit
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Topics:
•
•
Prerequisites
Remove the
Procedure
1
Press the securing clip and disconnect the power-supply unit cable (P1) from the system board (ATX SYS).
2
Press the securing clip and disconnect the power-supply unit cable (P2) from the processor-power cable (ATX CPU).
3
Remove the power-supply unit cable (P1) from the routing guide on the chassis.
4
Remove the four screws (#6-32x6.35) that secure the power-supply unit to the chassis.
5
Lift the power-supply unit along with the cables off the chassis.
20
36
Removing the power-supply unit
Summary of Contents for Inspiron 3670
