Installing the Keyboard
1.
Connect the keyboard connector of the replacement keyboard to the interface connector on the system board.
2.
Insert the four securing tabs on the keyboard into their respective slots in the palm rest, and lower the keyboard into the computer base.
Ensure that all four securing tabs are engaged before trying to completely seat the keyboard.
3.
Replace the four M2 x 3-mm keyboard screws.
4.
To replace the hinge cover, first insert the left side of the hinge cover into the notches. Snap down the hinge cover, and ensure that it is flush with the
palm rest.
1 M2 x 3-mm screws (4)
2 keyboard
3 keyboard connector
4 interface connector
NOTICE:
To avoid damage to the connector pins, press the keyboard connector evenly into the interface connector on the system board. Do not
reverse the keyboard connector.
1 M2 x 3-mm screws (4)
2 securing tabs (4)
3 interface connector
4 keyboard connector
Summary of Contents for Inspiron 5160
Page 19: ...Back to Contents Page ...