background image

Setting Up and Using Your Computer

35

Power Options Properties

Define your standby mode settings, hibernate mode settings, and other power 
settings in the 

Power Options Properties

 window. To access the 

Power 

Options Properties

 window:

1

Click 

Start  Control Panel  Pick a category  Performance and 

Maintenance

.

2

Under 

or pick a Control Panel icon

, click 

Power Options

.

3

Define your power settings on the 

Power Schemes tab, Advanced tab, 

and

 

Hibernate tab

.

Power Schemes Tab

Each standard power setting is called a scheme. If you want to select one of 
the standard Windows schemes installed on your computer, choose a scheme 
from the Power schemes drop-down menu. The settings for each scheme 
appear in the fields below the scheme name. Each scheme has different 
settings for starting standby mode, hibernate mode, turning off the monitor, 
and turning off the hard drive.

 

NOTICE: 

If you set the hard drive to time-out before the monitor does, your 

computer may appear to be locked up. To recover, press any key on the keyboard or 
click the mouse. To avoid this problem, always set the monitor to timeout before the 
hard drive.

The Power schemes drop-down menu displays the following schemes:

Always On

 (default) — If you want to use your computer with no power 

conservation.

Home/Office Desk

 — If you want your home or office computer to run 

with little power conservation.

Portable/Laptop 

— If your computer is a portable computer that you use 

for traveling.

Presentation 

— If you want your computer to run without interruption 

(using no power conservation).

Minimal Power Management

 — If you want your computer to run with 

minimal power conservation.

Max Battery

 — If your computer is a portable computer and you run your 

computer from batteries for extended periods of time.

book.book  Page 35  Friday, April 4, 2008  12:10 PM

Summary of Contents for Inspiron 531





















































































































































































































Reviews: