Steps
1
Align and place the touchpad into the slot on the palm-rest and keyboard assembly.
2
Replace the two (M1.6x2) screws that secure the touchpad to the palm-rest and keyboard assembly.
3
Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly.
4
Replace the three (M1.6x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
5
Slide the touchpad cable into its connector on the system board and close the latch to secure the cable.
6
Adhere the tape that secures the touchpad to the palm-rest and keyboard assembly.
Next step
1
Install the
.
2
Install the
.
3
Follow the procedure in
After working inside your computer
Power-adapter port
32
Removing and installing components
