Replacing the hard drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the
hard drive.
Procedure
1
Place the hard drive over the hard-drive bracket.
2
Align the screw holes on the hard-drive bracket with the screw holes on
the hard drive.
3
Replace the screws that secure the hard drive to the hard-drive bracket.
4
Connect the hard-drive interposer to the hard-drive assembly.
5
Slide the hard-drive assembly in the computer base and align the screw
holes on the hard-drive assembly with the screw holes on the computer
base.
6
Replace the screws that secure the hard-drive assembly to the computer
base.
7
Connect the hard-drive cable to the system board.
Post-requisites
1
.
2
.
34
Summary of Contents for Inspiron 5452
