Steps
1. Place the battery on the palm-rest and keyboard assembly.
2. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
3. Install the five screws (M2x3) that secure the 4-cell battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the system board and adhere the tape that secures the battery cable to the system board.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
About this task
The figure indicates the location of the memory module and provides a visual representation of the removal procedure.
20
Removing and installing components
