3
Lift the base cover away from the computer.
GUID-921F1F97-6EBE-4B02-A16E-C036C410C5AC
Installing the base cover
1
Align the base cover with the screw holders on the computer.
2
Press the edges of the cover until it clicks into place.
3
Tighten the M2x5 screws to secure the base cover to the computer.
4
Follow the procedure in
After working inside your computer
.
GUID-2F290758-2CFF-42C3-A93C-DC0EF3A54A0F
Battery
GUID-BF6DB8C1-8591-4D08-936D-8351B682BD1E
Removing the battery
NOTE:
92 WHr battery supports only SSD card and USB Type-C port, and cannot support 2.5–inch drive.
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the battery:
a Disconnect the battery cable from the connector on the system board [1].
b Remove the M2x5 screw that secures the battery to the computer [2].
c Lift the battery away from the computer [3].
Removing and installing components
13
Проконсультироваться
и
купить
данное
оборудование
вы
можете
в
компании
«
АНД
-
Системс
»
адрес
: 125480,
г
.
Москва
,
ул
.
Туристская
,
д
.33/1; site: https://andpro.ru
тел
: +7 (495) 545-4870 email: info@andpro.ru
При
обращении
используйте
промокод
AND-PDF
и
получите
скидку
.