GUID-1AAF2B1F-E442-482F-91BB-028388EFD0DE
Installing the display assembly
1
Place the display assembly to align with the screw holders on the computer.
2
Tighten the M2.0x5.0 screws to secure the display assembly to the computer.
3
Turn over the computer.
4
Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.
5
Connect the antenna cables and display cable to the connectors.
6
Place the display cable bracket over the connector and tighten the M2.0x5.0 screws to secure the display cable to the computer.
7
Connect eDP cable.
8
Route the WLAN cables through the routing channels.
9
Install the:
a
b
c
d
e
10 Follow the procedure in
After working inside your computer
.
GUID-00515E4D-657E-4F38-9C17-9C710680C719
Display bezel
GUID-CE47B64C-C088-4E23-BECA-59EB2AE82A97
Removing the display bezel
These instructions are applicable only for a non-touch screen.
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
f
3
Pry the edges to release the display bezel from the display assembly.
48
Removing and installing components
Проконсультироваться
и
купить
данное
оборудование
вы
можете
в
компании
«
АНД
-
Системс
»
адрес
: 125480,
г
.
Москва
,
ул
.
Туристская
,
д
.33/1; site: https://andpro.ru
тел
: +7 (495) 545-4870 email: info@andpro.ru
При
обращении
используйте
промокод
AND-PDF
и
получите
скидку
.