Option
Description
•
Disabled
•
AT: This option is enabled by default.
•
PS2
•
ECP
Serial Port
Allows you to configure the integrated serial port. The options are:
•
Disabled
•
COM1: This option is enabled by default.
•
COM2
•
COM3
•
COM4
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
•
Disabled
•
AHCI
•
RAID On: This option is enabled by default.
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
SATA-0
•
SATA-2
•
SATA-4
•
M.2 PCI-e SSD-0
SMART Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
Enable SMART Reporting
USB Configuration
This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•
Enable USB Boot Support (by default enable)
•
Enable External USB Port (by default enable)
•
Enable Thunderbolt Ports (by default enable)
•
Enable Thunderbolt Boot Support
•
Always Allow Dell Docks (by default enable)
•
Enable Thunderbolt (ans PCIe behind TBT) Pre-boot
•
Security level — No Secuirty
•
Security level — User Configuration(by default enable)
•
Security level — Secure connect
•
Security level — Display Port Only
78
System setup options
Проконсультироваться
и
купить
данное
оборудование
вы
можете
в
компании
«
АНД
-
Системс
»
адрес
: 125480,
г
.
Москва
,
ул
.
Туристская
,
д
.33/1; site: https://andpro.ru
тел
: +7 (495) 545-4870 email: info@andpro.ru
При
обращении
используйте
промокод
AND-PDF
и
получите
скидку
.
