background image

 

 

Boot Sequence 

This feature allows you to change the boot sequence for devices. 

 

 

Boot Options  

l

 

USB Floppy 

 

The computer attempts to boot from the USB floppy disk drive. If no operating system is on the floppy disk, the computer generates an 

error message. 
 

l

 

Hard Drive

 

 The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error 

message. 
 

l

 

CD/DVD/CD-RW Drive

 

 The computer attempts to boot from the CD/DVD/CD-RW drive. If no CD/DVD/CD-RW is in the drive, or if the CD/DVD/CD-RW 

has no operating system, the computer generates an error message. 
 

l

 

USB Storage Device 

 Insert the memory device into a USB connector and restart the computer. When 

F12 Boot Options

 appears in the lower-right 

corner of the screen, press <F12>. The BIOS detects the device and adds the USB flash option to the boot menu. 
 

l

 

Network

 

 The computer attempts to boot from the network. If no operating system is found on the network, the computer generates an error 

message. 
 

 

 

Changing Boot Sequence for the Current Boot  

You can use this feature to change the current boot sequence, for example, to boot from the CD/DVD/CD-RW drive to run the Dell Diagnostics from the 

Drivers 

and Utilities

 disc. On completion of diagnostic tests, the previous boot sequence is restored. 

 

 

1.

If you are booting from a USB device, connect the USB device to a USB connector.  
 

 

  

2.

Turn on (or restart) your computer.  
 

 

  

3.

When 

F2 Setup, F12 Boot Options 

appears in the lower-right corner of the screen, press <F12>.  

 

The 

Boot Device Menu

 appears, listing all available boot devices.  

 

 

4.

On the 

Boot Device Menu

 choose the device you want to boot from.  

 

For example, if you are booting to a USB memory key, highlight 

USB Storage Device

 and press <Enter>. 

 

 

Changing Boot Sequence for Future Boots  

 

 

1.

Enter system setup (see 

Entering System Setup

).  

 

 

  

2.

Use the arrow keys to highlight the 

Boot 

menu option and press <Enter> to access the menu.  

 

3rd Boot Priority 

Specifies the boot sequence from the available devices 

Hard Disk; CD/DVD; Network; USB Floppy; USB Hard Disk; USB CD/DVD; Disabled (USB Floppy by default) 

4th Boot Priority 

Specifies the boot sequence from the available devices 

Hard Disk; CD/DVD; Network; USB Floppy; USB Hard Disk; USB CD/DVD; Disabled (Network by default) 

5th Boot Priority 

Specifies the boot sequence from the available devices 

Hard Disk; CD/DVD; Network; USB Floppy; USB Hard Disk; USB CD/DVD; Disabled (USB Hard Disk by default) 

6th Boot Priority 

Specifies the boot sequence from the available devices 

Hard Disk; CD/DVD; Network; USB Floppy; USB Hard Disk; USB CD/DVD; Disabled (USB CD/DVD by default) 

 

 

Exit

 

 

 

 

 

Exit options 

Provides options to 

Save Changes and Reset, Discard Changes and Reset, 

and

 Load Defaults

 

 

NOTE: 

To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.

 

NOTE: 

To boot from the network, ensure that onboard LAN boot ROM option is enabled in the system setup (see 

System Setup

).

 

NOTE: 

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your 

computer and try again.

 

NOTE: 

To boot to a USB device, the device must be bootable. To ensure your device is bootable, check the device documentation.

Summary of Contents for Inspiron 620s












































Reviews: