1. Place the battery on the palm-rest and keyboard assembly and align the screw holes on the battery with the screw holes on the palm-
rest and keyboard assembly.
2. Install the four screws (M2x4) that secure the battery to the system board and palm-rest and keyboard assembly.
3. Connect the battery cable to the system board.
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Removing the 6-cell battery
NOTE:
The battery type in your computer varies depending on the configuration ordered.
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
The figure indicates the location of the battery and provides a visual representation of the removal procedure.
14
Removing and installing components
