1. Place the battery on the palm-rest and keyboard assembly and align the screw holes on the battery with the screw holes on the palm-
rest and keyboard assembly.
2. Replace the seven screws (M2x4) to secure the battery to the system board and palm-rest and keyboard assembly.
3. Connect the battery cable to the system board.
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Memory modules
Removing the memory modules
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Disconnect the
The figure indicates the location of the memory module and provides a visual representation of the removal procedure.
16
Removing and installing components
