1. If required, align the solid-state drive bracket to accommodate the M.2 2230 solid-state drive.
2. Align the notch on the solid-state drive module with the tab on the solid-state drive slot.
3. Slide the solid-state drive module firmly into the solid-state drive slot at an angle.
4. Replace the screw (M2x4) that secures the solid-state drive module to the palm-rest and keyboard assembly.
1. Connect the
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Removing the M.2 2280 PCIe solid-state drive
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Disconnect the
The figure indicates the location of the M.2 2280 PCIe solid-state drive and provides a visual representation of the removal procedure.
Removing and installing components
23
