Replacing the Memory Module(s) |
15
Replacing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For more
safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Align the notch on the memory module with the tab on the memory-module
connector.
2
Slide the memory module into the connector at an angle, and press the memory
module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and
re-install it.
3
Replace the memory-module cover.
Postrequisites.
Replace the battery. See "Replacing the Battery" on page 12.
1
memory-module connector
2
securing clips (2)
3
memory module
1
3
2
book.book Page 15 Friday, August 16, 2013 4:21 PM
