Back to Contents Page
I/O Board
Dell™ Inspiron™ N4020/N4030 Service Manual
Removing the I/O Board
Replacing the I/O Board
Removing the I/O Board
1.
Follow the instructions in
Before You Begin
.
2.
Follow the instructions from
step 2
to
step 13
in
Removing the System Board
.
3.
Remove the Mini-Card (see
Removing the Mini-Card
).
4.
Remove the screw that secures the I/O board to the computer base.
5.
Lift the I/O board out of the computer base.
Replacing the I/O Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the connectors on the I/O board with the slots on the computer base.
3.
Replace the screw that secures the I/O board to the computer base.
4.
Replace the Mini-Card (see
Replacing the Mini-Card
).
5.
Follow the instructions from
step 6
to
step 18
in
Replacing the System Board
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
I/O board
2
screw
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Summary of Contents for Inspiron N4020
Page 16: ...Back to Contents Page ...
Page 21: ......
Page 25: ...Back to Contents Page ...
Page 43: ......