8.
Using a plastic scribe, carefully pry out the palm-rest assembly along the rear edge and then ease the palm-rest assembly from the computer base
9.
Lift the palm-rest assembly off the computer base.
Replacing the Palm-Rest Assembly
1.
Follow the instructions in
.
2.
Align the tabs on the palm rest assembly with the slots on the computer base and gently snap the palm rest assembly in place.
3.
Slide the touch-pad cable, power-button board cable, and hot-key board cable into the connectors on the system board and press down on the
connector latches to secure them.
1
power-button board cable
2
touch-pad cable
3
screws (4)
4
hot-key board cable
CAUTION:
Carefully separate the palm rest from the computer base to avoid damage to the palm rest.
1
plastic scribe
2
palm-rest assembly
Summary of Contents for Inspiron N5110
