System Board
Dell™ Inspiron™ N5110 Service Manual
Entering the Service Tag in the BIOS
Removing the System Board
1.
Follow the instructions in
.
2.
Press and eject any installed cards from the 8-in-1 media card reader.
3.
Remove the battery (see
4.
Remove the module cover (see
).
5.
.
6.
Remove the memory module(s) (see
7.
Removing the Palm-Rest Assembly
8.
Remove the display assembly (see
).
9.
10.
Disconnect the speaker cable from the connector on the system board.
11.
Remove the five screws that secure the system board to the computer base.
12.
Lift the system board assembly to disconnect the connector on the system board from the connector on the I/O board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
CAUTION:
Handle components and cards by their edges, and avoid touching pins and contacts.
1
screws (5)
2
system board
3
speakers cable connector
Summary of Contents for Inspiron N5110
