13.
Turn the system board assembly over.
14.
15.
Remove the thermal cooling assembly (see
Removing the Thermal-Cooling Assembly
16.
Remove the processor module (see
Replacing the System Board
1.
Follow the instructions in
.
2.
Replace the processor module (see
Replacing the Processor Module
).
3.
Replace the thermal cooling assembly (see
Replacing the Thermal-Cooling Assembly
4.
5.
Turn the system board assembly over.
6.
Slide the connectors on the system board into the slots on the computer base.
7.
Gently press the system board to connect the connector on the system board to the connector on the I/O board.
8.
Replace the five screws that secure the system board to the computer base.
9.
Connect the speaker cable, to the connector on the system board.
10.
).
11.
Replace the display assembly (see
Replacing the Display Assembly
12.
Replacing the Palm-Rest Assembly
13.
Replace the memory module (see
Replacing the Memory Module(s)
14.
15.
Replace the battery (see
16.
Replace any cards or blanks removed from the 8-in-1 media card reader.
17.
Turn on the computer.
18.
Entering the Service Tag in the BIOS
).
Entering the Service Tag in the BIOS
1.
Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2.
Turn on the computer.
3.
Press <F2> during POST to enter the system setup program.
4.
Navigate to the security tab and enter the service tag in the
Set Service Tag
field.
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag in the BIOS of the replacement system board.
Summary of Contents for Inspiron N5110
