Camera Module
Dell™ Inspiron™ N5110 Service Manual
Removing the Camera Module
1.
Follow the instructions in
.
2.
Remove the battery (see
3.
Removing the Palm-Rest Assembly
4.
Remove the display assembly (see
).
5.
6.
).
7.
Gently peel the camera module from the from the display back cover.
8.
Remove the camera module.
Replacing the Camera Module
1.
Follow the instructions in
.
2.
Use the alignment posts on the display back cover to place the camera module in position and adhere it in place.
3.
Replace the display panel (see
4.
Replace the display bezel (see
5.
Replace the display assembly (see
Replacing the Display Assembly
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
1
camera module cable connector
2
camera module
Summary of Contents for Inspiron N5110
