I/O Board
Dell™ Inspiron™ N5110 Service Manual
Removing the I/O Board
1.
2.
Remove the display assembly (see
).
3.
.
4.
5.
Remove the Mini-Card(s) (see
).
6.
Remove the two screws that secure the I/O board to the computer base.
7.
Lift the I/O board at an angle to remove the connectors on the I/O board from the slots on the computer base.
Replacing the I/O Board
1.
Slide the connectors on the I/O board into the slots on the computer base and place the I/O board on the computer base.
2.
Replace the two screws that secure the I/O board to the computer base.
3.
Replace the Mini-Card(s) (see
4.
).
5.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
1
screws (2)
2
I/O board
Summary of Contents for Inspiron N5110
