1.
Follow the instructions in
Before You Begin
.
2.
Place the speakers in the computer base.
3.
Route the speaker cable in the routing guide on the computer base.
4.
Connect the speaker cable to the connector on the system board.
5.
Replace the four screws that secure the speakers to the computer base.
6.
Replace the status light board (see
Replacing the Status Light Board
).
7.
Replace the palm rest (see
Replacing the Palm Rest
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the optical drive (see
Replacing the Optical Drive
).
10.
Follow the instructions from
step 5
to
step 7
in
Replacing the Hard Drive
.
11.
Replace the module cover (see
Replacing the Module Cover
).
12.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
