Option
Description
Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting:
Allow Non-Admin Password Changes
is selected.
Non-Admin Setup
Changes
Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
If disabled the setup options are locked by the admin password.
Option "allow wireless switch changes" is not selected by default.
UEFI capsule
firmware updates
This option controls whether the system allows BIOS updates using UEFI capsule update packages. This option is
enabled by default
TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•
TPM On—enabled by default
•
Clear
•
PPI Bypass for Enable Commands—disabled by default
•
PPI Bypass for Disabled Commands
•
Attestation enable—enabled by default
•
Key storage enable—enabled by default
•
SHA-256—enabled by default
•
Disabled
•
Enabled—enabled by default
Computrace
Allows you to activate or disable the optional Computrace software The options are:
•
Deactivate
•
Disable
•
Activate—enabled by default
NOTE:
The Activate and Disable options will permanently activate or disable the feature and no further
changes are allowed
CPU XD Support
Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support—enabled by default
Admin Setup
Lockout
Allows you to prevent users from entering Setup when an Administrator password is set.
Default Setting: This option is enabled
Master password
lockout
This option is not enabled by default
Secure Boot screen options
Option
Description
Secure Boot Enable
This option enables or disables the
Secure Boot
feature.
•
Disabled
•
Enabled
26
System setup