Installing the smart card cage
1. Insert the smart cage into the slot on the tablet.
2. Replace the M2.0 x 2.5 screws screws to secure the smart card cage to the tablet.
3. Connect the smart cable to the smart card module.
4. Install the:
a.
b.
NOTE:
uSIM card is installed only on tablets shipping with WWAN module.
After working inside your tablet
.
Docking board
Removing the docking board
Before working inside your tablet
.
2. Remove the:
a.
NOTE:
uSIM card slot is available only on tablets shipping with WWAN module.
b.
c.
3. To release the docking board:
a. Disconnect the docking board cable from the system board [1].
NOTE:
The docking board FPC is obstructed by the speaker cable. Remove the right speaker first from the system
to replace the docking board.
b. Peel the docking board cable from the tablet [2].
c. Remove the M2.0 x 2.0 screws securing the docking board bracket to the docking board [3].
d. Lift the docking board from the tablet [4].
32
Using your tablet
