General screen options
This section lists the primary hardware features of your tablet.
Option
Description
System
Information
This section lists the primary hardware features of your tablet.
●
System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, Express Service Code, the Signed Firmware update—enabled by default
●
Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels
Mode, Memory Technology
●
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed,
Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable,
and 64-Bit Technology
●
Device Information: Displays M.2 SATA, M.2 PCIe SSD-0, Passthrough MAC address, Video Controller,
Video BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller, Wi-Fi Device,
WiGig Device, Cellular Device, Bluetooth Device
Battery
Information
Displays the battery status health and whether the AC adapter is installed.
Boot Sequence
Allows you to change the order in which the tablet attempts to find an operating system.
●
Internal SSD
●
USB Storage Device
●
CD/DVD/CD-RW Drive
●
Onboard NIC
Boot sequence
options
Allows you to change the order in which the tablet attempts to find an operating system:
●
Windows boot manager-selected by default
Boot list options
●
Legacy
●
UEFI—selected by default
Advanced Boot
Options
This option allows you the legacy option ROMs to load. The options are:
●
Enable Legacy Option ROMs-default
●
Enable Attempt Legacy Boot
●
Enable UEFI Network Stack
UEFI boot path
security
●
Always, except internal SSD
●
Always
●
Never
Date/Time
Allows you to change the date and time.
System Configuration screen options
Option
Description
SMART
Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
●
Enable SMART Reporting
USB
Configuration
This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to
boot any type of USB Mass Storage Devices—HDD, memory key, floppy.
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
●
Enable USB Boot Support—enabled by default
50
System setup
