3
To remove the memory module:
a Pry the clips securing the memory module until the memory module pops-up [1].
b Lift the memory module away from the connector [2].
Installing the memory module
1
Insert the memory module into the memory connector at a 30 degree angle until the contacts are fully seated into the slot. Then,
depress the module until the clips secure the memory module.
2
Install the :
a
b
3
Follow the procedure in
After working inside your computer
.
Keyboard
Removing keyboard lattice
1
Follow the procedure in
Before working inside your computer
.
2
Pry the keyboard lattice from the edges [1] and lift the lattice away from the system [2].
NOTE:
Gently pull or lift keyboard lattice in clockwise or anticlockwise direction to avoid breakage.
20
Removing and installing components
Summary of Contents for Latitude 5290
Page 1: ...Latitude 5290 Owner s Manual Regulatory Model P27S Regulatory Type P27S002 ...
Page 23: ...Removing and installing components 23 ...
Page 85: ...Video driver Verify if the video driver is already installed in the system Software 85 ...
Page 88: ...Image device driver Verify if the image device driver is installed in the system 88 Software ...
