Option
Description
Advanced Boot Options
Allows you to Enable Legacy Option ROMs.
The options are:
•
Enable Legacy Option ROMs
—Default
•
Enable Attempt Legacy Boot
UEFI Boot Path Security
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
•
Always, Except Internal HDD
—Default
•
Always
•
Never
Date/Time
Allows you to set the date and time. The change to the system date
and time takes effect immediately.
System configuration
Table 5. System Configuration
Option
Description
Integrated NIC
This option allows pre-OS and early OS networking features to use
any enabled NICs.
•
Enabled UEFI Network Stack
This options allow you to configure the integrated network
controller.
Click one of the following options:
•
Disabled
•
Enabled
•
Enabled w/PXE
—Default
SATA Operation
Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
•
Disabled
•
AHCI
•
RAID On
—Default
NOTE:
SATA is configured to support RAID
mode.
Drives
Allows you to enable or disable various drives on board.
The options are:
•
SATA-0
•
SATA–1
•
SATA–2
•
M.2 PCIe SSD-0
64
System Setup
Summary of Contents for Latitude 5290
Page 1: ...Latitude 5290 Owner s Manual Regulatory Model P27S Regulatory Type P27S002 ...
Page 23: ...Removing and installing components 23 ...
Page 85: ...Video driver Verify if the video driver is already installed in the system Software 85 ...
Page 88: ...Image device driver Verify if the image device driver is installed in the system 88 Software ...