Next steps
1. Replace the
2. Replace the
3. Replace the
4. Replace the
5. Follow the procedure in
after working inside your computer
.
Jahutusradiaator
Removing the heatsink
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
5. Remove the
Steps
1. Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2. Lift the heatsink away from the system board [2].
Komponentide eemaldamine ja paigaldamine
45
Summary of Contents for Latitude 5300 2-in-1 Chrome
