Product Features
General
●
10 BASE-T IEEE 802.3 specification conformance
●
100 BASE-TX IEEE 802.3 specification conformance
●
1000 BASE-T IEEE 802.3 specification conformance
●
Energy Efficient Ethernet (EEE)
●
IEEE 802.3az support [Low Power Idle (LPI) mode]
●
IEEE 802.3u autonegotiation conformance
●
Supports carrier extension (half duplex)
●
Loopback modes for diagnostics
●
Advanced digital baseline wander correction
●
Automatic MDI/MDIX crossover at all speeds of operation
●
Automatic polarity correction
●
MDC/MDIO management interface
●
Flexible filters in PHY to reduce integrated LAN controller power
●
Smart speed operation for automatic speed reduction on faulty cable plants
●
PMA loopback capable (no echo cancel)
●
802.1as/1588 conformance
●
Power Optimizer Support
●
Intel Stable Image Platform Program (SIPP)
●
Network proxy/ARP Offload support
●
Up to 32 programmable filters
●
No support for Gb/s half-duplex operation
Security and Manageability
●
Intel vPro support with appropriate Intel chipset components
Performance
●
Jumbo Frames (up to 9 Kb)
●
802.1Q & 802.1p
●
Receive Side Scaling (RSS)
●
Two Queues (Tx & Rx)
Power
●
Ultra Low Power at cable disconnect (<1 mW) enables platform support for connected standby
●
Reduced power consumption during normal operation and power down modes
●
Integrated Intel Auto Connect Battery Saver (ACBS)
●
Single-pin LAN disable for easier BIOS implementation
●
Fully integrated Switching Voltage Regulator (iSVR)
●
Low Power LinkUp(LPLU)
MAC/PHY Interconnect
●
PCIe-based interface for active state operation (S0 state)
●
SMBus-based interface for host and management traffic (Sx low power state)
Technology and components
45
