Installing the System Board
1.
Place the system board on the chassis.
2.
Tighten the screws to secure the system board to the computer.
3.
Place the power-connector bracket on the system board. Tighten the screws to secure the power-connector
bracket to the computer.
4.
Connect the following cables to the system board:
a) coin-cell battery
b) hall-sensor cable
c) smart-card cable
5.
Install:
a) display assembly
b) sniffer board
c) palmrest assembly
d) keyboard
e) base cover
f) SD card
g) battery
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Thermal Module
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a) battery
36