b Remove the M2x1.5 (2) screws that secure the power button board on the tablet [2].
c Slide and remove the power button board from the tablet [3].
Installing the power button board
1
Insert the power button board into the slot on the tablet.
2
Replace the M2x1.5 (2) screws to secure the power button board to the tablet.
3
Connect the power button board cable and close the latch on the tablet.
4
Install the:
a
b
c
5
Follow the procedure in
After working inside your tablet
.
WLAN card
Removing the WLAN card
1
Follow the procedure in
Before working inside your tablet
2
Remove the:
a
b
c
3
To remove the WLAN card:
Removing and Installing components
25
Summary of Contents for Latitude 7285
Page 1: ...Latitude 7285 2 in 1 Owner s Manual Regulatory Model T02J Regulatory Type T02J001 ...
Page 47: ...Disk driver Figure 2 Disk driver Technology and components 47 ...
Page 49: ...Storage controller drivers Figure 4 Storage controllers Technology and components 49 ...
Page 52: ...Thunderbolt Icons 52 Technology and components ...