b
c
3
To remove the SSD module:
a Remove the M2x2.0 (1) screw securing the SSD shield [1].
b Lift the SSD shield away from the tablet [2].
c Slide and lift the SSD module from the slot on the tablet [3].
Installing the SSD module
1
Insert the SSD module into the connector on the system board.
2
Install the SSD shield on the SSD module.
3
Replace the M2x2.0 (1) screw to secure SSD shield.
NOTE:
Align the shield carefully or else it may break.
4
Install the:
a
b
c
5
Follow the procedure in
After working inside your tablet
.
Removing and Installing components
27
Summary of Contents for Latitude 7285
Page 1: ...Latitude 7285 2 in 1 Owner s Manual Regulatory Model T02J Regulatory Type T02J001 ...
Page 47: ...Disk driver Figure 2 Disk driver Technology and components 47 ...
Page 49: ...Storage controller drivers Figure 4 Storage controllers Technology and components 49 ...
Page 52: ...Thunderbolt Icons 52 Technology and components ...
