2. Place the heatsink fan assembly in the computer [1].
3. Replace the two (M2x3) screws in sequence (2 > 1) on fan case and four (M2x3) screws in sequence (4 > 3 > 2 > 1) on the
heatsink fan assembly [1].
4. Connect the fan cable to the system board [2].
1. Install the
2. Install the
.
3. Install the
.
4. Follow the procedure
after working inside your computer
.
Removing and installing components
35
Summary of Contents for Latitude 7300
Page 19: ...4 Lift and remove the base cover from the computer Removing and installing components 19 ...
Page 56: ...3 Route the antennae and display cable along the hinges 56 Removing and installing components ...
Page 80: ...Figure 5 Power button board without FPR 80 Removing and installing components ...