7. Remove the
.
8. Remove the
9. Remove the
.
10. Remove the
11. Remove the
.
12. Remove the
.
1. Lift the latch and disconnect the keyboard cable [1] from the touchpad module.
NOTE:
Backlit keyboards have an extra backlight cable connection to the touchpad module.
2.
NOTE:
This image shows disassembly of a carbon fiber variant, an Aluminum variant of this model has 23 M1.6x2 screws
securing the keyboard assembly to palmrest.
Remove the 17 (M1.6x2) screws [2] and separate the keyboard assembly from the palmrest [3].
3. Remove the two (M2x2) screws [1] to lift the keyboard from the keyboard support plate.
82
Removing and installing components
Summary of Contents for Latitude 7300
Page 19: ...4 Lift and remove the base cover from the computer Removing and installing components 19 ...
Page 56: ...3 Route the antennae and display cable along the hinges 56 Removing and installing components ...
Page 80: ...Figure 5 Power button board without FPR 80 Removing and installing components ...