1. Install the
.
2. Install the
3. Install the
4. Install the
5. Install the
.
6. Install the
.
7. Follow the procedure
after working inside your computer
.
Display Cable
Removing the display cable
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
7. Remove the
.
8. Remove the
.
1. Peel back the adhesive tape securing the display cable to the camera-microphone module [1].
2. Gently peel off the display cable from its routing channel on the display back cover [2].
64
Removing and installing components
Summary of Contents for Latitude 7300
Page 19: ...4 Lift and remove the base cover from the computer Removing and installing components 19 ...
Page 56: ...3 Route the antennae and display cable along the hinges 56 Removing and installing components ...
Page 80: ...Figure 5 Power button board without FPR 80 Removing and installing components ...