Coin cell
Removing the coin cell
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
9. Remove the
.
10. Remove the
.
11. Remove the
.
12. Remove the
13. Remove the
.
14. Remove the
15. Remove the
.
16. Remove the
.
17. Remove the
camera-microphone daughterboard
.
18. Remove the
19. Remove the
1. Disconnect the coin cell cable from the connector on the system board [1].
2. Remove the coin cell from the computer.
Installing the coin cell
Connect the coin cell cable to its connector on the system board.
76
Removing and installing components
Summary of Contents for Latitude 7300
Page 19: ...4 Lift and remove the base cover from the computer Removing and installing components 19 ...
Page 56: ...3 Route the antennae and display cable along the hinges 56 Removing and installing components ...
Page 80: ...Figure 5 Power button board without FPR 80 Removing and installing components ...