Option
Description
Miscellaneous devices
Allows you to enable or disable various on board devices.
•
Enable Camera
—Default
•
Enable Secure Digital (SD) Card
•
Secure Digital (SD) Card Boot
- Disabled
•
Secure Digital Card (SD) Read-Only Mode
- Disabled
MAC Address Pass-Through
This feature replaces the external NIC MAC address (in a
supported dock or dongle) with the selected MAC address from
the system. The options are
•
System Unique MAC Address
— Default
•
Disabled
Video screen options
Table 24. Video
Option
Description
LCD Brightness
Allows you to set the display brightness depending upon the power
source. On Battery(100% is default) and On AC (100 % is default).
Privacy Screen
This option Enables or Disables the Privacy Screen if the Panel
supports this feature. The options are:
•
Disabled
: When Disabled the privacy screen is not applied to
the embedded display panel.
•
Enabled — Default
: When enabled, the privacy screen is
applied to the embedded display panel and can be toggled
between public mode and privacy mode using the Fn+F9 key
combination on the embedded keyboard.
•
Always On
: When always on the privacy screen is always on
and cannot be turned off by the user.
NOTE:
This option is present if the display supports e-
Privacy panel.
Security
Table 25. Security
Option
Description
Admin Password
Allows you to set, change, or delete the administrator(admin) password.
The entries to set password are:
•
Enter the old password:
•
Enter the new password:
•
Confirm new password:
Click
OK
once you set the password.
NOTE:
For the first time login, "Enter the old password:" field is marked to "Not set".
Hence, password has to be set for the first time you login and then you can change or
delete the password.
System setup
27