1. Connect the
2. Install the
.
3. Install the
.
4. Follow the procedure in
after working inside your computer
.
WLAN card
Removing the WLAN card
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Disconnect the
1. Partially peel off the Mylar sheet that covers the WLAN card [1].
2. Remove the single (M2x2) screw [2] that secures the WLAN card bracket to the WLAN card.
3. Remove the WLAN card bracket from the WLAN card.
4. Disconnect the wireless antennae cables [4] from the connectors on the WLAN card.
5. Slide and remove the WLAN card [5] from the connector on the system board.
Removing and installing components
31
Summary of Contents for Latitude 9410
