Troubleshooting: Dell Latitude ATG D620 User's Guide
Ensure that the CD is snapped onto the spindle
Check the cable connections
Check for hardware incompatibilities —
Resolving Software and Hardware Incompatibilities
Run the Dell Diagnostics —
.
CD and DVD drive problems
NOTE:
High-speed CD or DVD drive vibration is normal and may cause noise, which does not
indicate a defect in the drive or the CD or DVD.
NOTE:
Because of different regions worldwide and different disc formats, not all DVD titles work
in all DVD drives.
Problems writing to a CD/DVD-RW drive
Close other programs —
The CD/DVD-RW drive must receive a steady stream of data when writing.
If the stream is interrupted, an error occurs. Try closing all programs before you write to the CD/DVD-
RW.
Turn off Standby mode in Windows before writing to a CD/DVD-RW disc —
or search for the keyword
standby
in the Windows Help and Support Center for information on power
management modes.
Change the write speed to a slower rate —
See the help files for your CD or DVD creation software.
If you cannot eject the CD, CD-RW, DVD, or DVD+RW drive
tray
1. Ensure that the computer is shut down.
2. Straighten a paper clip and insert one end into the eject hole at the front of the drive; push
firmly until the tray is partially ejected.
3. Gently pull out the tray until it stops.
If you hear an unfamiliar scraping or grinding sound
●
Ensure that the sound is not caused by the program that is running.
●
Ensure that the disk or disc is inserted properly.
file:///H|/My%20Documents/Cellular/User%20Guides/Notebooks/D620%20ATG/trouble.htm (7 of 27)4/13/2007 4:36:42 PM