Using Networks: Dell Latitude ATG D620 User's Guide
2. Click
Connect
.
NOTE:
The
Connect
button changes to the
Disconnect
button.
3. Follow the instructions on the screen to manage the network connection with the utility.
OR
1. Click
Start
→
All Programs
→
Dell Wireless
.
2. Click
Dell Wireless Broadband
and follow the instructions on the screen.
Enabling/Disabling the Dell Mobile Broadband Card
NOTE:
If you are unable to connect to a Mobile Broadband network, ensure that you have all
the components for establishing a Mobile Broadband connection (see
Establish a Mobile Broadband Network Connection
), and then verify that your Mobile Broadband
card is enabled by verifying the setting of the wireless switch.
You can turn your Mobile Broadband card on and off using the wireless switch on your computer.
You can turn your computer's wireless devices on and off with the wireless switch on the left side of
).
If the switch is in the "on" position, move the switch to the "off" position to disable the switch and the
Mobile Broadband card. If the switch is in the "off" position, move the switch to the "on" position to
enable the switch and the Dell Mobile Broadband card. For information about the wireless switch
To monitor the status of your wireless device, see
Monitoring the Status of the Wireless Network Card
Managing Your Network Settings Through the Dell
QuickSet Location Profiler
The QuickSet Location Profiler helps you manage network settings that correspond to your computer's
physical location. It includes two categories of profile settings:
●
Location Profile Settings
file:///H|/My%20Documents/Cellular/User%20Guides/Notebooks/D620%20ATG/wireless.htm (9 of 11)4/13/2007 4:36:38 PM