Battery and Module Bay Latches: Dell Latitude C610/C510 Service Manual
Back to Contents Page
Battery and Module Bay Latches
Dell™ Latitude™ C610/C510 Service Manual
Removing the Battery and Module Bay Latches
Replacing the Battery and Module Bay Latches
Removing the Battery and Module Bay Latches
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE:
Read "
Preparing to Work Inside the Computer
" before performing the
following procedure.
1. Remove the
hard drive
.
2. Remove the
keyboard
.
3. Remove the
display assembly
.
4. Remove the
palm rest
.
5. Remove the
system board
.
6. Remove the latch button by using a plastic scribe to push on the snap tabs until
the latch button is released from the bottom case.
To prevent the latch assembly from coming loose, apply pressure to the latch and
spring while removing the latch button. If the latch assembly
does
come loose
from the case:
a. Slide the spring onto the slider on the latch, and reinstall the latch into the
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/baylatch.htm (1 of 3) [2/28/2004 7:55:55 AM]
