Microprocessor Module: Dell Latitude C540/C640 Service Manual
Back to Contents Page
Microprocessor Module
Dell™ Latitude™ C540/C640 Service Manual
Removing the Microprocessor Module
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE:
Read "
Preparing to Work Inside the Computer
" before performing the
following procedure.
NOTICE:
To ensure proper thermal operation, always install a new, compatible
thermal cooling assembly along with a new microprocessor.
NOTICE:
Do not touch the processor die. To ensure proper seating of the
microprocessor in the socket, press down near the edges of the microprocessor
module (on the substrate surrounding the die) while turning the cam screw.
NOTICE:
To avoid damage to the microprocessor, hold the screwdriver so that
it is perpendicular to the microprocessor when turning the cam screw.
file:///F|/Service%20Manuals/Dell/Latitude/c540-640/cpu.htm (1 of 4) [2/28/2004 7:57:53 AM]
