For a change to
Serial Port
to take effect, you must reboot your computer.
Service Tag
Service Tag
displays the computer's alphanumeric service code, which was programmed into NVRAM by Dell during the manufacturing process.
Be prepared to supply this identification during technical assistance or service calls. The service tag is also accessed by certain Dell support
software, including diagnostics. No user-selectable settings are available for this option.
Smart CPU Mode
Smart CPU Mode
allows the computer to slow down the microprocessor automatically if it is not being actively used.
Settings for this option are:
l
Enabled
(the default)
—
Allows the computer to slow down the microprocessor when it is inactive
l
Disabled
—
Keeps the microprocessor running at its normal operating speed regardless of microprocessor inactivity
When
Smart CPU Mode
is set to
Enabled
and the microprocessor is inactive, the computer slows the microprocessor to save power.
A change to
Smart CPU Mode
takes effect immediately (rebooting is not required).
Suspend Time-out
Suspend Time-out
lets you determine how long your computer remains idle before activating suspend mode to conserve battery power.
Suspend Time-out
settings for both
AC
and
Battery
options are:
To increase battery operating time, set
Suspend Time-out
to a lower number of minutes.
A change to
Suspend Time-out
takes effect immediately (rebooting is not required).
If you are not in the System Setup program, you can activate suspend mode at any time by pressing <Fn><Esc>. The computer resumes normal
operation automatically when you press the power button.
System Memory
System Memory
displays the total amount of synchronous dynamic random-access memory (SDRAM) installed in your computer. No user-
selectable settings are available for this option. The amount of memory displayed changes if you install or remove a memory module.
NOTE: Convert the service tag number into an express service code when prompted to do so the first time you turn on the computer (or
use the program in the
Dell Accessories
folder). Keep the code handy in case you call Dell for technical assistance. The code helps
Dell's automated support telephone system direct your call more efficiently.
NOTES: Some communications software may not work properly when
Smart CPU Mode
is enabled. Dell recommends that you set
Smart CPU Mode
to
Disabled
if you are using communications software.
Interactive application programs should function well when
Smart CPU Mode
is set to
Enabled
. (Examples of interactive programs
include spreadsheet, text editor, graphics design, entertainment, educational, and utility programs.) If your computer runs slowly while
performing such tasks as recalculating large spreadsheets, redrawing screens, or testing the microprocessor, set
Smart CPU Mode
to
Disabled
.
l
Disabled
l
1 Minute
l
2 Minutes
l
3 Minutes
l
4 Minutes
l
5 Minutes
l
10 Minutes (default)
l
15 Minutes
l
30 Minutes
l
1 Hour
NOTE: Set
Suspend Time-out
to
Disabled
if using it causes compatibility problems with your software.
Summary of Contents for Latitude CS
Page 38: ......
Page 43: ......
Page 69: ...The S2D partition was successfully created Back to Contents Page ...