Installing the I/O Board (Left)
1.
Place the I/O board on the computer.
2.
Tighten the screw to secure the I/O board to the computer.
3.
Install:
a) system board
b) ExpressCard cage
c) system fan
d) palmrest
e) display hinge
f) WLAN card
g) hard drive
h) optical drive
i) memory
j) keyboard
k) keyboard trim
l) base cover
m) battery
n) SD card
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the I/O Board (Right)
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a) SD card
b) battery
c) base cover
d) keyboard trim
e) keyboard
f) memory
g) optical drive
h) hard drive
i) WLAN card
j) display hinge
k) palmrest
l) system fan
m) ExpressCard cage
n) system board
3.
Perform the following steps:
a) Remove the screws that secure the I/O board on the computer.
b) Lift the I/O board and remove from the computer.
36
